Advantages To Using A Professional Carpet Flooring

Tile to Carpet Transition Options for a Stunning Floor

The transition between tile and carpet is the last step in most tile installation projects. It’s the final touch that can give your work an elegant and thorough look. However, it’s also one of the things that can disrupt the flow of your tile installation project

Finding the best tile to carpet transitions options can be a challenging task. For starters, you have two completely different materials, each with their unique particularities and different resistance to wear and tear. Besides their specifications, you also have to take the height of the different flooring options into account and make sure that the edge won’t turn into a potential tripping hazard for the residents.

Things get even more complicated when the carpet was installed before the tile. In this case, making the transition from carpet to tile look seamless can be a real challenge. Regardless how annoying tile to carpet transition can be, you can’t leave the job site until you tackle it. Of course, you could, but then you wouldn’t be able to call yourself a professional tile installer, right?

How to Transition from Tile to Carpet

One of the things that make transitioning from tile to carpet so prone to mistakes is that it looks like an easy enough task. Just install the tile and then cut the carpet where the tile section ends, right?

Instead, you should roll the edge of the carpet back from the tile. Install tack strips about half an inch away from the edge of the tile. Then, once the tile installation project is over, you can roll the carpet over the strips and push it onto the nails you hammered into the subfloor.



Commercial movers and tradesmen are obligated to protect the homeowner’s hardwood floors and carpeting and hard surfaces. They may utilize floor runners to create a main travel path, but this will still leave large portions of carpeting and flooring unprotected. And consider the stress during interior home renovations, when tradesmen must traverse back and forth, removing demolished material and hauling in new components and equipment to get the job done on schedule and without incident. Your professional flooring materials and carpeted areas are at risk of major damage if not protected.

Avoid Costly Damage to Carpet and Flooring

When steel-toe booted workers enter a property, they know that the flooring products are considered an investment. A high-quality flooring installation is meant to add value to the property. Often, residential property owners expect to recoup the cost of professional flooring such as wool cut-pile carpet with luxury, underlay padding when the home is sold. Once this type of carpet is badly damaged or soiled, either a large portion must be repaired – or the entire carpeted area must be replaced when the same color and style are no longer available

carpet prices can range from $1 per square foot for builder-grade olefin and polyester materials to $20 per square foot for high-end wool. The cost to replace your original carpeting will also depend on the type of fiber and weave, with denser and softer styles such as Saxony Plush or a Cable pile costing much more to replace. If your carpeting is constructed of natural fibers like cotton, sisal, or wool, these materials stain more easily and are harder to clean.

Common Causes of Flooring Damage

Accidents during a move can occur even with professional van line movers. These companies instruct workers to protect the customer’s floors from scratches, tears, stains, and dirt. Often, traditional products to protect floors and carpet will have a tendency to move or cause slips and accidents. And, the wearable products such as shoe covers are only helpful if the worker never goes outside the interior of the building.

How Carpets and Rugs are Ruined

Spilled paint or chemicals

Water or snow standing on carpet

Vehicle oil and gasoline stains

Embedded grease and grime

Food and drink spills that set into fibers

Lanes of traffic dirt paths

Pet or insect damage

High humidity leading to mildew


vinyl flooring care guide

Vinyl flooring is known for being fuss-free and low-maintenance. But when it comes to cleaning vinyl floors, there are still a few things you’ll need to do to keep it looking great. This care guide is filled with expert help to ensure you get the best from your vinyl over time.

Top Tips for caring for vinyl flooring

All products from Carpetright are safety tested however, it is important to keep vinyl flooring away from fire and naked flames to maintain maximum safety.

Bicarbonate of soda is your secret weapon; it’s tough on stains, but gentle on vinyl flooring.

Never use abrasive scourers on vinyl floors.

how to clean vinyl floors

Cleaning and maintaining vinyl flooring is relatively hassle free and requires a small amount of regular upkeep. In this section, we show you exactly how to clean vinyl with expert advice thrown in for good measure! Follow these hints and tips to keep your floor looking its best:

Loose debris, dust and dirt should be removed from vinyl flooring regularly. This can be done using a soft brush or with gentle vacuuming.

Vinyl flooring is non-absorbent which means any liquids will sit on the surface in puddles. This can damage the floor if left for long periods of time and also presents potential slip hazards to you and your family. Wipe spillages immediately and use a well wrung out mop or damp cloth to wash the surface; ensuring it dries out completely before walking on it again.

Warm water and a light soap will usually be enough to remove stains but products like bicarbonate of soda can also be handy on a tough stain.

Which cleaning products are safe to use with vinyl flooring?

Not all chemicals will be suitable for use on vinyl floors and you should always read the label before applying to your floors.

You should also make sure products are pet and child-safe if using in family homes, and always opt for natural ingredients wherever possible.

Never use abrasive scourers on vinyl floors as this can cause permanent damage to the surface.

How do you treat stains on vinyl flooring?

Begin by using a white damp cloth or towel to clean the surface with warm water.

Then use a vinyl flooring cleaner which can be purchased from specialist stores and rub the mark with a non-abrasive cloth to remove the mark or stain.

Depending on the colour and design of your vinyl flooring, you can use the following chemicals to remove stains:

Bleach (diluted with water) – for stubborn stains caused by food or drink

Alcohol – for tougher stains


Textile Flooring in Hotels

In the gastronomic business and hotel trades, the most important thing is the various conscious and unconscious factors that give you a sense of comfort and wellbeing. But apart from these requirements relating to the user, there are other aspects to consider. These relate to standards of safety and acoustics, targets of various kinds associated with cost-effectiveness, and of course there is the whole range of design creativity to be considered.

Hotel interiors, on the whole, have to put up with a lot. They must meet the high expectations of a demanding clientele, and they are permanently under observation. And this applies in a special sense to the floor coverings. These are not only subject to the extensive time scale of periodic renovation, they are also going to be cleaned every day, especially in the guestrooms. Transient residents are going to cast a critical glance over them, and will think any deviation from the ideal amounts to a personal affront. In the public areas of the hotel, this critical attitude is hardly any more lenient. To put it in a nutshell, if you want to be up to the mark you need to present yourself impeccably at all times.

Wool carpets are the best possible choice for various interior settings. Of course there is nothing new about this – but the variety of their concrete applications and properties nonetheless suggests interesting food for thought.

The acoustic and climatic properties of wool are extremely important, as also are the safety aspects. Acoustic quality is not just a matter of noise in the room. A non-slip pile cushions any movement, and can swallow up a good deal of the sound of footsteps.

The crucial factors for room climate are atmospheric humidity and temperature. Here wool is a star performer – just in view of its capacity for absorbing up to 30% of its own weight in moisture, without feeling clammy to the touch.


It’s the question on everyone’s lips: is carpet BAD for you?

There has been a lot of scaremongering over the years where carpet appears to be the enemy when it comes to aggravating health conditions like allergies and asthma. This has been a significant concern for the carpet industry to address as well. But, are these concerns justified? Today, evidence and research will point to the many health and psychological benefits that carpet-covered spaces provide to their users. If anything, carpets have the ability to soothe the senses and positively impact our mental and physical health.

So how are carpets advantageous to people with sensitivities?

A common misconception is that carpets are a cause of allergy increase. However, because allergens are transmitted through the dust particles in the air, this dust, hair and ultra fine particulate matter will be easily stirred and blown up in the air with as little as a breeze wafting in through the window, or people walking in a room. This is then inhaled, causing discomfort and irritation. And this is where the myths need to be debunked: contrary to popular belief, the fibres in carpets are able to trap these allergens and dust particles to ensure they are not released in the air so easily, unlike with hard flooring, where the dust particulates are easily disturbed through any movement through the space. As with all flooring, a sensible maintenance program is essential and for carpets – particularly when using a HEPA-filter vacuum cleaner – trapped allergens and dust mites will be permanently removed. What this does is mitigate allergy or asthma attacks brought on by dust, and some carpets are far more effective than others in doing this.

Physical health benefits

Among other health benefits, the Carpet Institute Ltd finds that carpets also emit lower levels of volatile organic compounds (VOCs). They explain how carpets are made to pass through a finishing oven that removes most of the solvents and volatile chemicals, leaving the final product with low VOC content. As a result, the emissions are significantly lower as well, especially when compared to most other building materials present indoors. What’s more, carpets tend to absorb VOCs like formaldehyde. This goes on to have a ripple effect of health benefits that help users breathe easy while also improving indoor air quality.

What about the psychological benefits?

Carpets have also been shown to bring down stress levels. The feeling of softness and padded flooring underfoot has an immediate effect on the mental frame of mind. In a study that asked forty-two people to walk on wooden flooring and carpeting for 10 minutes each; it was observed that the latter induced lesser stress than its wooden counterpart. That carpets can help in reducing psychological stress suggests the need to address the value of carpeting in indoor spaces and improving its overall public perception

Also, with properties like noise attenuation and sound-proofing, carpets are able to reduce stress from noise control, improve productivity and also impact patient health positively in aged care facilities.